DFI SB600-C Bedienungsanleitung PDF herunterladen (Seite 133)

133

Troubleshooting

Hard Drive

Hard disk failure.

1. Make sure the correct drive type for the hard disk drive has been entered in

the BIOS.

2. If the system is conﬁ gured with two hard drives, make sure the bootable

(ﬁ rst) hard drive is conﬁ gured as Master and the second hard drive is conﬁ g-

ured as Slave. The master hard drive must have an active/bootable partition.

Excessively long formatting period.

If your hard drive takes an excessively long period of time to format, it is likely a

cable connection problem. However, if your hard drive has a large capacity, it will

take a longer time to format.

Serial Port

The serial device (modem, printer) doesn’t output anything or is out-

putting garbled characters.

1. Make sure that the serial device’s power is turned on and that the device is

on-line.

2. Verify that the device is plugged into the correct serial port on the rear of the

computer.

3. Verify that the attached serial device works by attaching it to a serial port

that is working and conﬁ gured correctly. If the serial device does not work,

either the cable or the serial device has a problem. If the serial device works,

the problem may be due to the onboard I/O or the address setting.

4. Make sure the COM settings and I/O address are conﬁ gured correctly.

Keyboard

Nothing happens when a key on the keyboard was pressed.

1. Make sure the keyboard is properly connected.

2. Make sure there are no objects resting on the keyboard and that no keys are

pressed during the booting process.

1 2 ... 128 129 130 131 132 133 134

Keine Kommentare

DFI SB600-C Bedienungsanleitung Seite 133