Dfi EC700-BT Installation Guide Bedienungsanleitung PDF herunterladen (Seite 2)

Installing a 2.5" SATA Drive

1. Locate the SATA drive bay on the system board. Unplug the SATA power and data cable, and

remove the 4 mounting screws that secure the drive bay to the system board.

2. Align the mounting holes of the SATA drive with the mounting holes on the HDD bracket and then

use the 3 provided mounting screws to secure the drive in place.

Mounting Screw

2.5" SATA drive

Mounting Screw

SATA drive bay

SATA power cable

SATA data cable

1 2 3 4

Keine Kommentare

Dfi EC700-BT Installation Guide Bedienungsanleitung Seite 2