Dfi KS200 Installation Guide Bedienungsanleitung PDF herunterladen (Seite 2)

Connecting Cables to Terminal Blocks

1. Insert the cable end of the power adaptor to the terminal block. To rmly x the cable into

the terminal block, use a screwdriver to clamp down the wires to the screw that is in the

terminal block.

Terminal block

Wire

Power adapter cable

2. Plug the terminal block into the DC-in connector and then tighten the screws to secure the

terminal block in place.

DC-in

connector

Screws

White Wire

Black Wire

+ -

1 2 3

Keine Kommentare

Dfi KS200 Installation Guide Bedienungsanleitung Seite 2